Five Tips for Avoiding Tire puncture - InsuranceRise

Friday, 22 July 2016

Five Tips for Avoiding Tire puncture



Five Tips for Avoiding Tire puncture

Over time the tires are spending, and sometimes air can leak or burst. It's frustrating when this happens to your personal vehicle, but even more so when it's your commercial vehicle is out of service. It is an unexpected expense, not only for the price of new tires, but lost time.

Luckily, there are some steps you can take to prevent and avoid that one of the tires of your personal or commercial vehicle is empty while you're on the road.


  • regular inspections 


It is important to give each tire a visual inspection regularly, and conduct a more thorough inspection occasionally. A simple visual inspection is to ensure that the tires are properly inflated, they are not worn beyond the recommended, and do not have any nail, screw or debris in the bands, which could cause potential problems. A deeper inspection involves a few more steps.

  • Make sure they are properly inflated 


The first step of a deeper inspection is to check the tire pressure with a gauge air. If the pressure is too low, tires can overheat and this can cause it to burst. If it is too high, the tires are stretched beyond normal and may also be susceptible to rupture.

Besides preventing air leaks, proper tire pressure provides adequate performance for the vehicle with a balance of traction and more efficient gas mileage. The US Department of Transportation recommends checking the tire pressure at least once a month.

  • Maintain it regularly 


Beyond keeping tires properly inflated, additional maintenance involves balancing and tire rotation. Rolling ensures that the weight is evenly distributed around the circumference of the rim, providing a uniform, smooth ride. The rotation distributes the way the tires wear according to how the vehicle performs.

  • Keep a tire replacement date 


The date of replacement tires is based on two factors. The first is the tread located on the rim. When the lines of the tread are aligned with the points scored between tread, it is time to change the tires. The second factor is the mileage guaranteed by the manufacturer of the tire.

  • Educate your employees driving style 


Unfortunately, with a fleet of vehicles you do not have direct control over the management style of each employee. Still, it is important to incorporate measures for safe handling, since it is not only a good idea in general, but the speed too fast, braking and cornering lead to tire wear and potential air leaks.
Previous Post
Next Post

0 comments: